bt_logo.jpg
2965 Pittsburgh Road
Perryopolis, PA 15473
p: 724-736-0600
f: 724-736-8082
www.balltransfer.com
pipe_mount001036.gif pipe_mount001034.gif pipe_mount001032.gif pipe_mount001030.gif pipe_mount001028.gif pipe_mount001026.gif
Quick, Friendly Service
1-800-938-0878
sales@balltransfer.com
Pipe Mount Ball Transfer Units
Flange
Stud
Disk
Spring
Loaded
Machined
Press
Pipe
Bolt Down
Disk
Round
Black Oxide
Press / Stud
Press In -
Bolt Down
© Copyright 2010 Ball Transfer Systems, LLC
2965 Pittsburgh Road, Perryopolis, PA 15473
phone: 724-736-0600 fax: 724-736-8082
QUICK LINKS
Part #
1-1/2 PMC
1-1/2 NPMC
1-1/2 PMS
1-1/2 NPMS
 
 
 
 
 
 
Request a Quote
Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
 
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
 
Load Capacity
250 lbs.
175 lbs.
350 lbs.
175 lbs.
 
pipe_mount001019.gif pipe_mount001017.gif pipe_mount001015.gif pipe_mount001013.gif pipe_mount001011.gif pipe_mount001009.gif pipe_mount001007.gif pipe_mount001005.gif pipe_mount001003.gif pipe_mount001001.gif
Pipe mount ball transfers provide support without hindering the operators movements. The 2-inch pipe mount, when used in front of shears or press breaks provides more accurate positioning than casters. Hardened ball and cup provide durability while the sealed housing keeps dirt out for long life. Corrosion-resistant stainless steel units are available for wash down applications. Available with a nylon main ball to prevent material marking.